Early starts

I woke at 3:45am and knew I'd need the toilet soon. It's 5⁰, but feels like half that. The slight breeze isn't helping. The toilet isn't close. And I need to pack up first. I'm lucky it isn't raining. No dew is a bonus. The tent is dry. 

I've contemplated leaving everything, going to the toilet and returning to pack up later. But that seems a waste. I don't leave my tent up. I'm not going to go back to bed. Two trips, and I'd still need to pack up. 

I change clothes, rugging up for the cold. Pack the sleep wear, sleeping quilt, foam mat, and the tent. As the toilet urgency increases, I get more efficient packing. 

Riding, thankfully, delays the need. I wonder if it's evolutionary adaptation or just the way the muscles work. 

The deed done, I'm free to think about what next for the day. The sun isn't up for hours yet, and it feels colder now.  

Enjoying the peace of this early morning, I walk pushing, or scootering my bike. On one slightly downhill section of footpath, I pretend I'm competing in a luge. I crouch over the handlebars, one foot on a pedal, the other leg stretched backwards, coasting, trying to get as streamlined as I can. Each day I note how far I make it compared to a street light pole. Some days more, others less.  My best day might have had a tail wind, but there's skill involved too. The straightest lines, avoiding holes and bumps. 

The sun isn't up yet, and it feels colder. Though I wear sandals, I switched to wool socks on my feet a few weeks ago, so my toes are okay. I've put thick socks over half finger gloves to keep my fingers warm. My sock friends. Thumb at the heel, fingers in the foot and they work like mitts. I keep meaning to find my full finger gloves, but forget in the afternoon warmth. Today I'll remember. Rain is coming. The full finger gloves are waterproof, unlike my sock friends.

A Sock Friend

A life outdoors

After selling my caravan, I started designing a new one. It started with all the high quality materials, but then I worried about the time to build it, and the cost.  From my first caravan, I'd learnt my time estimations were consistently severely underestimated. The "perfect" first caravan wasn't, and I thought I was unlikely the second build would be. I decided to build a quicker model, using just Bunnings materials. Simple and cheap. Try quickly. Make errors fast. Correct from there. 

But before I started, I had to leave Sydney for a while. I was away for a month. It gave me time and space to consider where I was at. 

I decided I didn't want to spend more time building. I needed accommodation now, not in weeks to months. 

I'd been doing some house sitting while the trike and caravan were sold, but that was over. I'd kindly been allowed to stay longer, but I felt it was long enough. I wasn't comfortable continuing. I wanted my own place.

An eBay order later and I was ready.

It's a cheap 2 person single walled dome tent. Does the job. Keeps the rain out. It's been cold and wet lately. Fog at times.   Condensation happens. I dry it out at lunch time.

A Morning View

I'll never grow tired of this morning view.

Tough Decision Time

I reluctantly decided I needed to sell my caravan. Without the ebike or the trike I couldn't move it easily. It's too heavy for me to move it with pedal power only.

The weight is 71kg with the bed box and mattress. 58kg with them out. The 270w of solar panels on the roof are about 10kg. They are glued on. The electrical box is excessive without the 48v charging system.

External: 2200mm L, 960mm w, 1400mm high.

Internal: Bed is 1820mm long and 630mm wide. Floor to ceiling is 1070mm. Hight over the bed: 900mm. Bed base is removable.

Cabin can be unbolted from the chassis. Chassis is welded aluminium. Cabin is 30mm XPS, with PMF.

Widows can stay open in the rain. They have multiple positions. Fly screens. Right side window has dual fans fitted. Fans are reversible. I leave them running 24x7 to have airflow through the cabin. There is an excess of solar on the roof to charge the battery even without direct sun.

Hitch is a single sided left side arm, connect to the bike axle.

Hydraulic disk brakes. Manually activated by rider.

If someone is inclined and has the ability, they could connect it up to an ebike and tow it, but I think it'll probably suit someone that wants a tiny house.

I want to build another: lighter!

I advertised it. Got a lot of interest. And then it was gone.

The end of an era

After riding the trike for a few weeks, I had to admit to myself that I couldn't see it as my every day bike. Yeah, there are times its heaps of fun, but mostly it wasn't working for me. Carrying it up and down stairs. Lifting it up and down paths without ramps, or the ramp is just too narrow. Lifting it between bollards and other obstructions too narrow to pass. I missed being up higher and seeing further a head on the road. Looking up at truck and lifted 4x4s. I missed being able to walking and pushing my bike. The trike is made for riding, not pushing.  

Lots of angst about if to sell it or not. A coupled problem was how to move the caravan without the trike. Eventually I decided to rip the bandaid off and listed the trike for sale. Decision made. 

Sold it to a lovely couple that only ride trikes. It'll have many happy adventures with them.

The caravan as it is currently is at an end. I've been sleeping in it since December, and love it. I really don't want to part with it, but I can't keep it as it is. It was started when 500 watt ebikes were legal. Build decisions were based on the need to have solar on the roof for charging and a 48V charging system inside. With no ebike and now no trike, the caravan is just too heavy for me to shift with a pedal bike. 

I'm exploring options on what to do with it. 

I'll sell it as is, or just the cabin and keep the trailer to build a new cabin on top of, or worst case it all gets scrapped. I'm hoping to avoid that.  

Trike Riding!

Been feeling unsure about my caravan setup. I know people are using unpowered trikes with heavier caravans than mine. But reading about it and having your own working are two different things.

Despite having the trike for weeks now, I've hardly ridden it. With the hub gear it was insanely high geared. I couldn't pedal it up slight rises. As I was living at the bottom of a large hill, I only did a few circles on the road in front of the house.

I fitted a new rear wheel, with a 11-50 cassette. The bottom bracket needs to change to get 22,32,42 chainrings. Currently it's using 30,42,52. I also want to get a 12T on there for a quad chainring setup. Was waiting for that to get done before using it.

Today, decided that I needed to ride it to help settle some of my worries about using it with the caravan. I'll need to ride it next week to finish an adaptor for the caravan hitch. So after a bit of tuning it up, I took it for a ride to the shops. Chain isn't adjusted right yet, but I can access most gears. More than enough for day to day use.

Riding a trike is heaps of fun!

A new doubt: how long the derailleur is going to last. After the first few scraps, I take more care. But lots of uneven surfaces around here and it keeps getting hit.

New Wheels

 

Disaster struck: the ebike died. Rather than repair it, I decided to stop using an ebike all together.

Current state of affairs

 Been a while since the last blog post, but progress hasn't stopped. If anything it has been in a bit of a frenzy of late. The current state: caravan still not 100% finished, but I don't think it never will be. It'll be continual tinkering.

The painting is finished. Pin striping is on. The original tape didn't stick. I vastly underestimated how long spraying the stripes on would take. Though, it wasn't the spraying as the masking that took so long.

Pin stripes done

Electrical panel was wired up and installed. Solar panels mounted and connected.

I've been sleeping in it since 19th December. That day was a 40°C. The house (brick and timber) heated up and retained the heat. The caravan heated up with air temperature, but as it has zero thermal mass, as the sun went down and the air temp dropped, the caravan cooled. The house was much slower. It was cooler in the van. I do have a ventilation fan on one window, but just having the windows open was enough breeze to feel cool sleeping.

By sleeping inside it each night, I've opening/closing the door a lot. Some of the discoveries from this:

1. Three wheels would have been a better choice. Anything I can't reach from the open door, that needs me to step inside needs the back legs down. If I need anything from the front, the front legs need to go down too. Even for just putting them down once, there is an amount of fussing. I added a bubble level to help with leveling.
2. Two locks on the door got old fast. Two locks on the outside and two catches on the inside. The door needs it, but one would be much more user friendly.
3. The door opening upwards seemed a good idea. It does double as an awning when it showers. The door doesn't have support struts, but I do have some supports I can put under it to hold it up was an awning. But that doesn't happen as often as it is get in/get out, or open and get something in/out and close it again. I lift it enough to slip in/out from the side. Or if I need to get rummage a bit, it rests on my back as I do so. In the future I may redo the door to a barn door configuration with one lock.
4. I made the van a little too short. 30cm more would have been a bit cramped getting in and closing the door without being on the bed.
5. I thought I'd sleep with my head at the door end, but ended up liking the other way around. This meant the shelf that my feet were to go underneath was too low. I banged my head on it a few times. It was the first change next day: cut the shelf out and the repaint the wall. I've come to thinking that the shelving I have would be better as soft bags or nets hanging on the walls.
6. The bed is 630mm wide, but with the wheel wells and shelving beside it, there is no room to push off the sleeping bag to the side. The bed is effectively in a well. The sleeping bag is either stuffed to a side, pressing against my back or pushing over my legs/front, or, pushed to the end of the bed. Lately I found that stuffing it in a bag is better. Keeps it bundled up taking up less room even if its down where my legs are.
7. The electrical panel has a surprising amount of lights: blue, orange, green and red. So bright, I haven't needed an inside light. New to me the first night was that some of them flash. All night. I'd never noticed in the day, but at night, it's very noticeable. I'm still using the temporary fix of hanging a shirt over it each night. One day I'll make a better cover.
8. It seemed a good idea to have the electrical panel face the bed. Sit in bed, turn the switches on/off, see the voltage/current/power meters and plug in devices to the USB and cigarette lighter socket. Reality is that I don't need the switches very often. Most things have another switch closer to the business end, or it doesn't matter if they are turned on/off. eg. the ventilation fans, USB devices. I leave the fans on 24x7. The meters, I looked at often on the first few days, but rarely look at them now. The battery drain is so low, and I've so much solar, that even on overcast and rainy days, under the trees, the battery fully recharges. The UBS/cigarette access was a major pain point. I couldn't leave anything plugged in over night as the plugs in stuck into be bed space. Turning over could catch the lead or plug and break it. Anything plugged in really wanted to be on the bed. I still use the sockets when I'm awake, but I installed a cigarette lighter socket and USB plugs on the forward and backward sides of the panel for when I want to leave things plugged in over night. There is shelf space in front and behind to leave devices, rather than on the bed and the cables are out of the bed.
9. The roof was extremely loud in the rain. Light rain was okay, but heavier showers, it was unbearable. I'm parked underneath some trees and larger water drops drop from the branches. They manage to make a loud cracking sound. The raised solar panels are okay, so it was only the strip around them that was the problem. With testing, a piece of fabric is enough to break up the drops to deaden the noise. I wanted green velvet but type I got was too thin. I found a piece of cream corduroy. It works to deaden the noise, but I'm not sure if it will remain. I'll leave it on for now and monitor how the water drains and if it drys enough to not become mouldy.
10. The bed! So many problem with the bed. It was terrible for storage underneath. When I cut the original height down, I thought I was clever by making it 110mm high - the height of a tin of beans. I was thinking that tinned food could be also be the bed top supports. But too many things are taller than 110mm. So I had a storage problem for stuff I had planned on going under the bed. The bed creaked a lot. I laminated it with paper rather than fabric like the rest of the caravan foam. But the paper with glue/paint become very stiff and hard. No give at all. The polycarbonate bed top and floor creaked when it rubbed on them. I could have fixed this, but I made the base a tight fit between the wheel wells and shelving. More creaking points. and as the fit was so tight, no space to put anything to stop the rubbing. New bed base fixes all these and more.

New bed base under construction

Cheap Solar panels

When I planned the caravan, I took a quick look about on online for solar panels. I saw that a 100W panel was about 1m long. The next size up was about 1.5 or 1.6m long. That was the basis for the caravan. If I'm committed to 1.6m, when my tent is 1.9m long, why not sleep under the solar panel?

A few months ago I looked quickly on Ebay and saw 300W and 400W panels. Small sizes too. Wow. This is great. Cheap too! I could get 4 panels on the roof. That's an amazing 1200 watts! I'll be swimming in power. Solar must have improved a lot. I was happy for weeks.

Then I went to order. 

Money on the line, so I really dug into the details and specs to compare panels.  A huge face palm moment. How did I not notice earlier!

I won't put a link here, but search Ebay and you'll find a lot of examples for cheap solar panels.  I'm looking at flexible panels, but this also applies to rigid panels.

Taking one example on Ebay, advertised as 400W for $136.99.  Looking through the nice pictures, lots of claims of high efficiency. High conversion rate. Panel size is 960x670mm. Nice and small. The seller has a lot of sales. High ratings and good reviews.

Scrolling down to "Item specifics" to get more details is the first hint of something not quite right. 

Power: 201-300W  Charging Mode: PWM (Pulse Width Modulation)
Connector Type: MC4   Wattage: 300-399W 

Power versus Wattage? What's this about?  Both given as a range, but it is advertised as 400W.  What would I really get out of it?

The panel is using monocrystalline cells. 

Solar Technology: Monocrystalline

Googling, the top result: Monocrystalline cells are rated at 15%–24% efficiency. Looking at other results, 15%-20%, 15%-23%.   Note this is for the cell. After you encapsulate it in plastic the rating will drop. But then searching for solar panel efficiencies, I also find 15%–24%.  Cheap Ebay panels are unlikely to be 24%.

How to compare solar panels: using Standard Test Conditions. 

Standard Test Conditions (STC) are the industry standard conditions under which all solar PV panels are tested to determine their rated power and other characteristics. When a panel is advertised as having a capacity of 350W for example, this is the power it is expected to produce under STC. 

It tests a cell at:

Cell temperature: 25°C
Irradiance: 1000 W/m²
Air mass: 1.5

This is the cell, there are other measurements that give a more real world data for a panel. 

But taking STC, and using the 1000W/m² and a low and high efficiency value, we have:

The panel size is:  0.960x0.670m = 0.64m²
Panel Wattage = Solar Irradiance x Area x Efficiency

Low efficiency: 15% 
            =  1000 W/m² x 0.64m² x 15%
            = 96 W

High efficiency: 24%
            =  1000 W/m² x 0.64m² x 24%
            =  154 W

96-154W is a long way from the advertised 400W. Not even close to the 201W power rating either.

But I might not get even that. That was at 1000 W/m².  Using the solar radiation in Sydney. On the day I was doing the calculations, the maximum was 961W/m² at midday. The average of 10am to 3pm was 833W/m². The day average was 569W/m².

Running the numbers again this time using 15, 17, 20 and 24% efficiency for the hours of the day. How many watts at the different hours at an efficiency.

October 28
----------	------------
Sunrise	06:00
Sunset	19:18
Total	7398 wh/m²
Panel m²	0.64
		Watts
Time	W/m²	15%	17%	20%	24%
07:00	144	14	16	18	22
08:00	376	36	41	48	58
09:00	594	57	65	76	91
10:00	777	75	85	99	119
11:00	901	86	98	115	138
12:00	961	92	105	123	148
13:00	826	79	90	106	127
14:00	771	74	84	99	118
15:00	763	73	83	98	117
16:00	612	59	67	78	94
17:00	445	43	48	57	68
18:00	213	20	23	27	33
19:00	15	1	2	2	2

What time you test and the efficiency of the panel matters. In the real world, that 400W panel is only going to give a maximum of 148W on that day if (and that's a bit if) it is 24% efficient and the temperature of the panel is 25C.  Spoiler: It won't be 25C in the sun and it isn't 24% efficient.

All the high quality brand name panels I checked had Monocrystalline efficiencies of 17%, so using that, the 400W panel might give 105W at midday at most. Real world will be less.  Flexible panels also  degrade faster than rigid panels.

But all is not lost.  

I created a spreadsheet of all the solar panels I was looking at. On and off Ebay.  The off Ebay panels were by Renogy, Sunman and ATEM. Their specifications as advertised.  Price, size, advertised watts, panel type, Voc and Vmp. I then calculated the watts at STC for all panels based on its size. No surprise, most Ebay panels were way less than advertised. But not all. All the non Ebay panels I included were better than advertised at STC. 

I also calculated $/watt at STC for all panels. If area wasn't a concern this would be one deciding metric, but panel size was also important to me. I only have so much space on the roof. How could I get the maximum use of it?

With the different panel sizes, I could get between 1 and 4 panels.  In the end, I decided on three Ebay panels advertised at 400W, but by my calculations are more likely to be 90W each.  I got lucky that the seller was having a sale, so each panel ended up costing $70 delivered.  There was a Sunman panel I really liked with watt output only slightly lower than the combined three I panels I ordered. But I could only get one on the roof and it's price was significantly higher.  Annoyingly a couple of weeks later, they had a 60% off sale. At that price I would have purchased it. But too late by then. 

I'm happy with the three I did order. All the reviews of flexible panels show they don't last as long as rigid panels. Flexing cracks the cells, lowering output. Over heating is a problem if they don't have an air gap underneath. As my caravan is insulating foam, I intend to mount them raised. So having cheap panels for a first go suits me. I think of it as an experiment to test the mounting system. When they fail, I'll know more about my usage and the mounting system. Then I might look at a more expensive options.

 

The Year of the Caravan

This year the caravan will finish! Well, finished enough to be in use. I'm not sure it will ever really be finished. Already I have a list of fixes, changes and improvements. But not now. The focus is on getting it done. Changes can happen later.

December was looking promising. I had lined up time with my welder friend to get some chassis fixes done. The brake caliper mount. Strength the draw bar attachment. Make the disk brake handle mounting seen in the previous post. I also lined up another friend to help with the electrical wiring. The best laid plans of mice and men often go awry.¹ I caught COVID. There are no quarantine rules anymore, but I wasn't going to share the infection.

I did end up getting the welding done. And over the Christmas - New Year time, got the disk brakes mounted. The cabin got another coat of paint on the outside also.  I've still more to finish and look forward to the Men's Shed reopening.

The delay for the electrics turned into a good thing. It was going to be two ebike batteries: one on the ebike, one in the caravan. Charge the one in the caravan, swap with the ebike when required. But the caravan battery needs to provide power while it is charging. The BMS in the battery I have doesn't allow that. If it is charging, discharge stops. A work around was to charge it via the discharge port, but I wasn't keen on that solution. I thought to have a small 12v battery for caravan supply, and charge that from the ebike battery or solar. Eventually I decided to have the caravan just use a 12v battery and skip the second ebike battery. I'll charge the ebike battery when I'm stopped. 

Well, that's the plan.

¹: https://www.dictionary.com/browse/the-best-laid-plans-of-mice-and-men-often-go-awry

Brakes

Been thinking about brakes on and off for as long as the caravan has been going. A lot of the European caravans use inertia brakes. I wasn't keen on that option, preferring to have direct control on the braking. Some of the caravans had no brakes. Madness! I can't think of a time when you'd think "Gee, I glad I don't have brakes!"

So, I need to activate two brakes on the caravan from the bike. And it needs to be able to disconnect. I've flip flopped between mechanical and hydraulic, one lever or two. Even considered electrical. Stressed over if one or two cables from the bike all the way to the caravan wheels would be able to activate brakes. Would there be too much play in the system? Do I need a booster system. Do I need pulleys in places to smooth the action? 

I decided to use hydraulics at the calipers. Mainly to avoid having to adjust them. So then it turned into how activate them. One lever to activate both? They do make such a beast, but besides the eye watering price tag, I didn't find any quick connectors for bicycle hydraulics.  So have to use two levers.  I did consider making new levers, but using the existing levers would be simpler for the future. 

The previous post with the caravan hitched to the bike was to see how much clearance there was for the brake lever mounting. Heaps of space. phew!!

Deadlines focus the mind. Tackled the brakes. Cobbled together this test setup. Dowel, wood clamps and scraps.

The full test setup for dual brakes from one lever

I used a kids cart brake lever and cable. The garden rake had the right handle size to fit the brake levers on.

Close up of the cable to lever (front)

Some scrap metal with the right size hole for the front. Adjuster is needed to tension the brake cable. There is one also at the lever end.

Close up of the cable to lever (back)

A lucky piece of aluminium with just the right bend in it for the back. I don't think my test would have worked so well if it was flat. I used an old V-brake to pinch the cable so it wouldn't pull through.

Levers mounted on dowel.

It worked! Very happy with the it. A few refinements will be needed for the final design. Needs more clamping. The cable could jump off too easy otherwise. The final will be out of aluminium rather than wood.

Hitched up!

 

It's so white!

First time hitched the bike. A new hitch, and of course, you can't miss the cabin.  Hadn't realised I didn't paint the wheel wells until now. Will paint them black. The mass of white will be broken up with pinstripes.

A short pedal about the street. Rolls easy on the flat. No motor needed for the short, small incline I tested it on. 

How not to hang a door

The door took much more work than I had thought. A common occurrence during this build. Everything seems so simple and easy, until I start doing it. Then I find all the things I hadn't thought of. Learn that my plan isn't working out. And blow past my expected finish date. 

It seemed like a good idea to position the piano hinge on the door and lintel while they were both flat on the floor. Drill the holes in the holes in both. Then they would line up straight. Did that, then glued the lintel to the caravan body.  And then I bolted the door on and groaned.

Notice a problem?

Look closely at the bottom of the door. The gap on the left compared to the right. Not even close. 

I experimented with moving the holes on the lintel, but wasn't happy with how that was working out. Too many holes for the piano hinge would be too close to the edge. The basic problem was that the roof is not 100% level. There is a 5mm difference one side to the other.  Unnoticeable looking at the roof, but hanging a metre long door off it and the slight slope is amplified. Gluing the lintel to the roof really wasn't a good idea. I did consider just ignoring it, but I would look at the gap every time I opened the door. And I'm sure I'd quickly grow tired of people telling me it was crooked. 

Decided to remove the lintel. Wasn't easy. A lot of cutting glue and foam with a knife. 

Working on a solution

I had thought to glue a thin triangle wedge on top of the lintel to space up one side down. But as I was setting up to cut the wedge, I realised that I could also cut off a wedge from the lintel. 

A test with the door on and holding it all together with clamps to check the door would hang straight this time. Marked out where the lintel would have to go.  Undid all the set up. Coated the lintel in glue and clamped it on. 

Can't have too many clamps

And after the glue has set, the moment of truth.

Worth the effort!

Yes!

Wiley Windows

Been a while since the last update. Work on the caravan has been happening though.

I thought making windows would simple. A couple of weeks. Easy. No surprise it didn't turn out that way.

My first window didn't get finished. The timber I used was too heavy. After looking at using aluminium, I settled for three ply at a bad time. At the two nearest hardware stores three ply was out of stock and on back order. I waited for orders, but no three ply. Tired of waiting I recycled cupboards and boxes.

I settled on four windows all in landscape mode. The door has a A6 sized (105 x 149 mm) window, just to see out before I open the door. The front would have an A4 (210 x 297mm). And the sides would have an A3 (297 x 420 mm). I'm not certain on the A4 window. It may change to an A3 in the future. But at the time, I didn't have enough three ply to make it larger anyway. Also, I decided to just get it done. Improvements can happen in the future.

Different colors for the different recycled wood.

Wiley Windows are what I wanted. I liked all the options they provided. They can be full open, partially open, even when raining, fit block out screens and mossie screens.

Weights while gluing the front edging on

The three ply was not marine grade, so I coated it with epoxy to waterproof it. At the time, the weather was cold. So cold that the epoxy was like peanut paste and wouldn't pour from the containers. When it warmed up a bit, it would flow, but found that the low temps, the set time was extended by a lot. Unless the surface was flat, it slumped off, or set on the way to slumping off. I was also surprised to find the wood soaked up the epoxy. It took multiple coats to get a layer of epoxy on.

The idea was that a piece of perspex A4 or A3 would fit in the window. A small error. I was 3mm off on one dimension for each window. I think it was the kerf on the saw on the wrong side of the marking line. Didn't pick it up until I went to fit the perspex. But okay in the end as can cut down the perspex to fit.

Cutting the holes in the cabin was a bit nerve wracking. I used the perspex sheets to mark with so that they would be level compared to the roof line. I marked out around the perspex and cut the laminate with a utility knife. I peeled it off, then drilled a large hole in the four corners. Used a hacksaw to cut roughly between the holes. Then I used the hot knife to smooth cut close to the marked edges.

Did you pick up my mistake in that list of steps? The windows are larger than the perspex. Back to marking out the difference onto the walls, cut the laminate off, cut the foam with the hot knife again. Now the windows fit.

Windows in the cabin.

Epoxy isn't UV resistance, so needed painting. Black on the outside, white inside.

Painted waiting for the cabin to be ready.

Windows aren't installed yet, as the cabin interior needs to be laminated.

PMF (Poor Man's Fibreglass) Time

It was time to attach the roof to the walls, and then start the laminating. 

I removed the cabin from the chassis. Checked it all over and filled any gaps or holes. I used a foaming polyurethane glue. Using a plastic spatula to spread it into and over any holes, then tape over with masking tape. Without the tape, it was sometimes too bubbled to give a smooth look when sanded. As it was setting, pressed with the spatula to pop the bubbles and force into the gap/hole. After it set, removed the tape and sanded it smooth. 

After all the gaps had been filled, it was flipped it on its roof. I wanted to start from the base and work towards the roof, so any seams would overlap downwards when it is upright. I cut the fabric to fit the base. It overlaps 90mm on all sides. I marked the edges to help line up the fabric when replacing it over the paint. 

Was happy and a bit miffed to find the fabric is 1140mm wide. I had in my head that it was 1000mm wide. That's great as less seams needed.    The side laminate is one piece of fabric wrapped from the back, down the side, across the front, down the second side to the back. Over five metres.  I'll have to cut 10mm off all of it.  Miffed, as when I lowered the roof, the height from the bottom of the floor to the top of roof is 1130mm.  I'd have made the roof 10mm higher if I'd known.

I had decided to just use paint to attach the fabric.  Applied paint on the foam, press the fabric into the paint.  I put a plastic bag over one hand to smooth the fabric. The plastic slides. The other hand, I could grab and stretch the fabric to help pull out any wrinkles. Another coat of paint was immediately applied over the top to wet the fabric fully.  It was important to get the fabric saturated, else it didn't stick well to the foam. 

I had a few bubbles appear after it had dried. To fix them, I used a pin and punctured the bubbles. Keep pricking the bubbles to make a lot of holes. Can't have to many holes. Some of the bubbles deflated with this. But if they didn't, I smoothed them flat and apply more paint over the top. They stayed down after that.  

Everything went pretty good. Only worry for me was that the fabric was soaking up the paint. 

Finally I flipped the cabin on the base and to laminate the roof. And this is where I stuffed up. For reasons that escape me now, I decided to use Titebond 2 rather than paint. Big mistake. It was harder to apply. It was tacky and the plastic bag trick didn't work. I had to pull the fabric tight. At the end, it looked good wet, but as it started to dry a lot of bubbles started to show. Then the weather turned to rain, and humidity was high for two weeks. The glue didn't want to dry fully. It was staying tacky. I read about using an electric iron, but lacking this, I boiled a saucepan of water and used that. I put baking paper down first and sat the saucepan of boiling water on top. The good news was that the tacky glue hardened after it cooled. Bad news was the the flat looking bubbles actually bubbled upwards. So many bubbles. Some returned to flat when cool, some didn't.  What would happen in the sun? I didn't want to find out. And it looked terrible.

I peeled the fabric and glue off. Need to pull it in a peeling motion. Filled in any patches that needed it and sanded the roof again. Now I'm waiting for more fine weather to redo the roof fabric layer with paint. 

Gluing the roof on 

Used straps and weights

Fabric ready on the base

Applying the paint

Smooth it with hand in a plastic bag

Base all attached

Fabric and paint on the side 

Side all attached

Marking the roof fabric 

Flat bubbles on the roof

Bubbles getting worse

Removing the roof fabric

Bed Done!

Built a bed base with storage bins. A raised bed with storage underneath.

Bed box in!

But, sitting/lying on the bed and it sagged more than I liked. I experimented with more supports under the lids, and with thicker lid options. Either would have worked, but I eventually decided that the the amount of under the bed storage I had built wasn't needed. Too much storage and it's tempting to fill it. I would use the beside the bed area, and shelving. I could then cut the walls down for a lower roof height. A lower roof is better as it will catch the wind less,a and be less prone to tipping over. 

Bed base was 200mm high. This was to give height to sit up on the bed. Wheel base is 800mm. Roof was 1200mm off the floor, 1500mm of the ground. 

I wavered on roof height when I went to cut the walls down. It wasn't just the sit up height on the bed. The door opening height is important to me. A lower roof = a lower door opening, or a thinner lintel over the door. The door will open upwards under the roof, and I want it to open more than 90°.  I want to be able to sit in the doorway and not hit my head. Decided I wanted to keep an under bed storage option for the future in case I really did need it, so rather than lowering it 200mm, I cut 130mm off.  Roof is 1070mm from the floor.

Bed box out and cutting shelving. 

Assembly Time!

More sanding and gluing. The door and surrounds. Glued the door frame to the walls. Found out later I made a mistake on the measurement. Door was too narrow. Forgot to add on the wall thickness. Lucky for me I was able to cut the excess off. 

More laminating. More tries with epoxy. More tries with glue. Right now, I've delaminated more than I've laminated. Decided to give up with both and stick to using paint.  Laminated the underside of the roof while it was flat on the floor. Figured it would be easier than upside down.

Moved the chassis to the garage and assembled the walls and roof on it. Finally it's starting to look like a caravan.  Glued the side walls to the floor. Going to hold out on the front wall and the roof until after some of the internal fit out is completed.  

Looking from the front towards the rear doorway. Roof is on to help stabilise the walls. 

Corners

Doesn't feel like a lot was achieved this week. Other stuff happening, meant less time for the caravan build. A few stuff ups also sent me backwards.  

Lots of cutting foam when mistakes where made. The door was glued up. I cut and glued up the wheel well sections. I cut a lot of triangle sections to frame the corners as in the image below.  They'll be glued in today and then given a light sanding in preparation for the fabric coating.

Squaring Off

An exciting week. I gave up bashing my head trying to square off the panels. The 1200x600 XPS panels when I started weren't very square. I should have squared them all before joining them together. But it seemed a good idea to leave that until later. Now, being later, I wish I hadn't. Trying to square up the full panels was a lot harder than I thought it would be. After countless tries, with string, straight edges and not so straight edges, I gave up and asked for help.

Tom arrived with his van. We loaded it all up and took it to the Men's Shed. The plan was to use the table saw to trim off the edges. No edge being straight stopped that idea. We ended up clamping a foam panel to an MDF panel set up on a table. Line up two edges of the foam at a corner of the MDF. They had to be some overlap, as the edges weren't straight or square. Check that too much foam was not going to be removed. Then I then sanded the two sides to match the MDF panel edges. I used a right angle to check the edges as I sanded. Done! Two edges (more or less) straight and at 90 degrees to each other. Undo the clamps, move the foam, line up one of the now straight edges with an edge of the MDF. Use the a tape measure to check the dimensions. (The walls needed to be the same height. The roof needed to be 960mm wide). Clamp. Sand the edge that isn't straight to match the MDF. Unclamp, move and get the last edge lined up. Clamp. Sand. Quicker to describe than to do. Several hours of sanding to get it all done. Tom then dropped me and the foam back home again. Thank you Tom!

I did another epoxy test this week. A small test piece. I used a paint brush rather than a scraper to spread the epoxy about. This test went a lot better. For one side of a 1 sqm piece of foam, the added fabric and epoxy  weight would be 280g. I also did a test with PVA glue, that was right on 200g. Both are acceptable. Using a roller or scraper might get the epoxy weight lower. 

PVA glue is so much easier to use.

Door Locks and Epoxy

Epoxy doesn't mix with locks.

I started the first epoxy pour on the front panel, but wasn't happy with how it turned out. The weight was higher than planned.

The fabric overlapped the edges so I could trim it later. Pulling on this, I was able to peel the epoxy impregnated fabric off.

It only pulled a small amount of foam off. Checking the weight, I was right. The epoxy impregnated fabric weighed 535g. So I was right with 100g fabric and about 440g epoxy.  Way too much epoxy.

The 1200x960mm (1.152m²) piece of foam with some epoxy still on it is 1200g. I weighed some spare pieces and 1m² of foam weighs 1.027kg. This is heavier than the 900g I was calculating on, so the panel should weigh 1184g. There is a little epoxy in the join and on the edges where the fabric wasn't.

Need to do more epoxy testing. I'm reluctant though. Thinking to change to using glue and paint only. Thinking about it. I started some test pieces. It's much easier to use. Still deciding how I'll go forward with that. I'll get the foam pieces squared off first, then coat them. This will give me more time to decide.

I cleaned up the chassis, support legs and drawbar removing rough edges. These were on the inside of the tubes.  I used rags to clean out any aluminium filings.  Also marked up the support legs to cut the adjustment slot. Need to wait for a teacher on that. They'll show me how to safely use the lathe or milling machine.

The door locks I had ordered ended up being a "captured key" type. These are for mailboxes, or cupboards where you put the key in, open the lock, but can't remove the key until you close and lock it again. Easy, I'll just drill a hole in the right place to let the key out. It worked!

Until I taped the lock. Small brass pins fell out. Locks aren't meant to do that: drop their innards out.  The lock jammed up.  As I had two locks, I decided to try drilling between the pins. But that didn't work either. Pins still fell out. Two locks stuffed.